Related Manuals for Spectrum Controls InView 2706-PENETx2-SC
Summary of Contents for Spectrum Controls InView 2706-PENETx2-SC
- Page 1 InView ™ INDUSTRIAL MESSAGE DISPLAYS Quick Start Guide 2706-PENETx2-SC www.spectrumcontrols.com Copyright ©2015 Spectrum Controls, Inc., all rights reserved. Part No. 0100249-04 Rev 9/2015...
- Page 2 Connect the unmanaged switch to both your PC and PLC with a CAT5 cable. IMPORTANT – PC & PLC must be in the 192.168.1.x subnet! www.spectrumcontrols.com Copyright ©2015 Spectrum Controls, Inc., all rights reserved. Rev 2/2015 Copyright ©2015 Spectrum Controls, Inc., all rights reserved. Part No. 0100249-04 Rev 9/2015...
- Page 3 With a CAT5 cable, connect the comms module to an unmanaged switch. Connect the unmanaged switch to both your PC and PLC with a CAT5 cable. IMPORTANT – PC & PLC must be in the 192.168.1.x subnet! www.spectrumcontrols.com Copyright ©2015 Spectrum Controls, Inc., all rights reserved. Part No. 0100249-04 Rev 9/2015...
- Page 4 With a CAT5 cable, connect the comms module to an unmanaged switch. Connect the unmanaged switch to both your PC and PLC with a CAT5 cable. IMPORTANT – PC & PLC must be in the 192.168.1.x subnet! www.spectrumcontrols.com Copyright ©2015 Spectrum Controls, Inc., all rights reserved. Part No. 0100249-04 Rev 9/2015...
- Page 5 With a CAT5 cable, connect the comms module to an unmanaged switch. Connect the unmanaged switch to both your PC and PLC with a CAT5 cable. IMPORTANT – PC & PLC must be in the 192.168.1.x subnet! www.spectrumcontrols.com Copyright ©2015 Spectrum Controls, Inc., all rights reserved. Part No. 0100249-04 Rev 9/2015...
- Page 6 With CAT5 cable, connect the comms module to an unmanaged switch. Connect the unmanaged switch to both your PC and PLC with CAT5 cable. IMPORTANT – PC & PLC must be in the 192.168.1.x subnet! www.spectrumcontrols.com Copyright ©2015 Spectrum Controls, Inc., all rights reserved. Part No. 0100249-04 Rev 9/2015...
- Page 7 Note: The PC and the PLC must be in the same subnet as the InView Eth1 interface. Note: Only use Eth1, leave Eth2 set to “DHCP” www.spectrumcontrols.com Copyright ©2015 Spectrum Controls, Inc., all rights reserved. Part No. 0100249-04 Rev 9/2015...
- Page 8 1705 132nd Ave NE, Bellevue, WA 98005 Telephone : +1 (425) 746-9481 Email: spectrum@spectrumcontrols.com Specifications subject to change without notice. Printed in USA Copyright ©2015 Spectrum Controls, Inc., all rights reserved. Part No. 0100249-04 Rev 9/2015...
Need help?
Do you have a question about the InView 2706-PENETx2-SC and is the answer not in the manual?
Questions and answers