Spectrum Controls InView Series User Manual page 115

InViewCtrl Methods
ClearMemory
Chapter 5: InView Control and InView Control API
Properties Description
Syntax HRESULT ClearMemory()
Parameters None
Return Value S_OK - Success
E_FAIL - Failure
Description This method is used to reset the display and clear
its memory. After clearing memory, the display
will be set to 2000 messages of 100 bytes each, and
each message slot will be set to a message of
Message #n where n is the message number. The
clear memory command will be sent to the display
address set by the DisplayAddress property.
DisplayAddress should be set before calling this
method.
User's Manual 0300277-02 Rev. D
5-9