Spectrum Controls InView Series User Manual page 48

2-8 Chapter 2: InView System Connectivity
NOTE
User's Manual 0300277-02 Rev. C
3. Choose the communication rate you wish to set the display at and click
on the Set button:
There is no confirmation that the command was sent. The display must be
power cycled to view the new communication rate settings.
Isolated Communication Ports
The isolated communication ports consist of RS-232, RS485, 10/100 Ethernet
port and a RS-232 download port. This allows the 2706-P92C-SC and 2706-
P94C-SC displays to support multiple networks simultaneously. This allows
programmers to change the messages or tie into an information database, while
control operators can continue delivering alarms and messages to the plant floor.