Siemens Sinumerik 840D sl Programming Manual page 161

10818
MD number
Default setting:
Changes effective after POWER ON
Data type: BYTE
Meaning:
10820
MD number
Default setting:
Changes effective after POWER ON
Data type: BYTE
Meaning:
10880
MD number
Default setting: 0
Changes effective after POWER ON
Data type: WORD
Meaning:
ISO Milling
Programming Manual, 06/09, 6FC5398-7BP10-1BA0
EXTERN_INTERRUPT_NUM_ASUP
Interrupt number for ASUB start (M96)
min. input limit:
Number of the interrupt input with which an asynchronous subroutine activated in the ISO
mode is started. (M96<Program number>)
EXTERN_INTERRUPT_NUM_RETRAC
Interrupt number for rapid retraction (G10.6)
min. input limit:
Number of the interrupt input with which a rapid retraction is triggered in the ISO mode at the
position programmed with G10.6.
MM_EXTERN_CNC_SYSTEM
External control system whose programs are processed
min. input limit: 0
Selecting the external language
1 = ISO-2: System Fanuc0 Milling (from 5.1)
2 = ISO-3: System Fanuc0 Turning (from 5.2)
Here, the functional scope defined in the current Siemens documentation is valid.
This data is evaluated when the machine data $MN_MM_EXTERN_LANGUAGE is set.
Protection level:
Valid as of software version: 6
Protection level:
Valid as of software version: 6
Protection level: 2/7
Valid as of software version: 5
Data Description
C.1 General machine data
max. input limit:
Unit: -
max. input limit:
Unit: -
max. input limit: 2
Unit: -
161