Siemens Sinumerik 840D sl Programming Manual page 89

Example
M3 S2000
G90 G0 Z100
G90 G99 G83 X200. Y-150. Z-100.
R50. Q10. F150.
Y-500.
Y-700.
X950.
Y-500.
G98 Y-700.
G80
G28 G91 X0 Y0 Z0
M5
Note
If _ZSFR[10]
• > 0 = Value is used for the derivative path "d" (minimum distance 0.001)
• = 0 The derivative path is 30 mm and the value of the derivative path is always 0.6 mm.
ISO Milling
Programming Manual, 06/09, 6FC5398-7BP10-1BA0
The drilling depth/50 formula is always used for larger drilling depths (maximum value 7
mm).
;Rotary motion of stem
;Positioning, drilled hole 1,
;then return to point R
;Positioning, drilled hole 2,
;then return to point R
;Positioning, drilled hole 3,
;then return to point R
;Positioning, drilled hole 4,
;then return to point R
;Positioning, drilled hole 5,
;then return to point R
;Positioning, drilled hole 6,
;then return to initial plane
;Deselection of the fixed cycle
;Return to reference position
;Spindle stop
Additional functions
4.1 Program supporting functions
89