Siemens Sinumerik 840D sl Programming Manual page 152

Data Description
C.1 General machine data
10652
MD number
Default setting: "ANG"
Changes effective after POWER ON
Data type: STRING
Meaning:
MD cannot be changed for SINUMERIK 802D sl.
10654
MD number
Default setting: "RND"
Changes effective after POWER ON
Data type: STRING
Meaning:
MD cannot be changed for SINUMERIK 802D sl.
152
CONTOUR_DEF_ANGLE_NAME
Adjustable name for angle in the contour short description
min. input limit: -
The setting is effective only for Siemens G code programming, i.e. G290.
The name under which the angle is programmed in the contour short description can be
adjusted. Hence, for instance, identical programming in different language modes can be
implemented:
If "A" is specified as name, then the angle is specified the same way in Siemens
programming as in ISO dialect.
The identifier must be unique, i.e. there should be axes, variables, macros etc. having the
same name.
RADIUS_NAME
Adjustable name for radius non-modal in the contour short description
min. input limit: -
The name under which the radius is programmed in the contour short description can be
adjusted. Hence, for instance, identical programming in different language modes can be
implemented:
If R is specified as name, then the radius is specified the same way in Siemens
programming as in ISO dialect.
The identifier must be unique, i.e. there should be axes, variables, macros etc. having the
same name.
The setting is effective for Siemens G code programming, i.e. G290.
Protection level: 2/7
Valid as of software version: 5
Protection level: 2/7
Valid as of software version: 5
Programming Manual, 06/09, 6FC5398-7BP10-1BA0
max. input limit: -
Unit: -
max. input limit: -
Unit: -
ISO Milling