Handling And Installing Media - MUTOH Osprey 75 User Manual

3.2 HANDLING AND INSTALLING MEDIA

Be sure to read and understand the safety warnings before handling the printer.
The following describes the procedures for installing and setting roll media, setting types of media, and using
the winding unit.
The procedure required for media installation is shown in the following flow diagram.
Refer to the following items according to the model to be used before performing the operations.
3. When the winding unit is used, set the roll medial to the winding unit.
1. Install the roll media on the scroller.
Refer to: "Placement of the roll media"
↓
2. Set the roll media to the product.
Refer to: "Loading roll media"
↓
Refer to: "Setting winding unit"
↓
4. Set the media type.
Refer to: "Setting media type"
41
User's Guide – Osprey 75/102/130
Chapter 3: Basics
AP-75102, Rev. 2.0, 28/11/2007