Table of Contents
Advertisement
Flue transition extension
Code:
LSFEXTKIT01
Flue transition extension, approx.
300 mm. When connected reduces
45 mm each end (approx). MUST BE
used with the ASPDFK before any
bends, for example in side and back
flueing.
Includes; flue extension, flue standoff
bracket, flue slide stopper (4822),
O-ring silcone grease.
Steel flue guard
Code:
R1370
Protection against hot flue gases
when the termination is low to the
ground. Colour - warm white.
•
220 x 220 mm
•
Ø 146 mm
45° flue bends (two bends in a kit)
Code: ESBEND
Two 45° bends used to facilitate between horizontal, vertical, and downwards
flueing. Two spacers are included. Can be used separately, or together as a
90° bend.
Wall terminal kit
Code: ESWTERM
Used to terminate the ESPIPE900
in horizontal flue installations when
used in conjunction with LSFKIT01.
Contains:
•
External wall plate (black PVC)
•
Flue terminal (aluminium)
Wall plate
Code:
ESPLATE
Used if an extra wall cover
is required to tidy any installation
through the wall, ceiling, or floor.
Outer diameter 170 mm.
Linear installation guide 13563-H 08-19 | 47
Advertisement
Table of Contents
