Installing The Linear Into The Cavity - Rinnai RHFE1000 Installation Manual

Installing the Linear into the cavity

Hand hold
Using the handholds (white slots LHS and carry bars RHS), carefully lift and slide the Linear into
the enclosure and position in place.
Adjustable feet and seismic brackets
Use the feet on all corners of the unit to adjust the fire so that it is level. The feet are adjustable.
Having the unit level is critical to the installation, so the wall lining can be installed flush with the
lips of the appliance.
Once level secure the Linear to the bottom of the cavity using the four seismic brackets.
To level the unit and not affect where the feet go, the
seismic brackets need to be elevated before the unit is
installed into the cavity
Carry bar position, two carry bars
Linear installation guide 13563-H 08-19 | 19