Table of Contents
Advertisement
Reset Filter Life Menu Interface
On the Top Level Menu, press the Reset Filter Life button to
display buttons that are used to reset the life percentages
of the individual filters. These buttons are used when the
cartridges are changed. Press to reset. The word "RESET"
will display when the filter life has been reset.
Carbon Prefilter life is displayed on the Prefilter Status
screen and the History Page 1 screen.
RO Membrane Life is displayed on the History Page 1 screen.
Carbon Post-Filter Life is displayed on the History Page 1
screen.
The # of RO is used to select the number of RO membrane
cartridges that are installed on the system.
System Settings Menu Interface
On the top level menu, accessing the System Settings Menu
requires a password. Contact Pentair Everpure Technical
Support at 630.307.3000 to acquire the password.
Enter the password at the Home screen. The System Settings
Menu displays:
Used to enter/change the date and time.
Date and
Time
Press to make changes to the units and values
Units of
shown in the User Interface.
Measure
Press to make changes to settings for the
Store
application.
Settings
Press to perform a manual tank air purge, a
Air Purge/
flush, RO rinse, or a tank fill.
Flush
Press to view troubleshooting and sensor
Production
information.
Test
Press the Set Date and Time Button to display
Date and
a screen for setting the Day/Month/Year and
Time
Time.
Press the Set DST and UTC button to display a
DST and
screen for setting Daylight Savings Time and
UTC
the time zone.
DST: Daylight Savings Time
UTC: Coordinated Universal Time
Adjust the settings and press the Check Mark to confirm and
change.
24
WATER YOU CAN TRUST
®
Reset Filter Life
Carbon
Carbon
Pre-Filter
Post-Filter
RESET
# of RO
RO
Membrane
1
System Settings Menu
Date and
Store
Time
Settings
Units of
Air Purge/
Measure
Flush
System Settings Menu
Set Date
Set DST
and Time
and UTC
Date And Time
01
jan
16
fri
12
00
am
2
Advertisement
Table of Contents
