Pentair Everpure Conserv HE-3 Original Instructions Manual page 20

EVERPURE CONSERV
® ®
INTERFACE
The User Interface allows the integration with several
features on the Conserv HE-3 RO System. A complete
explanation of the interface is provided in this manual.
The top level User Interface (UI) Home screen is accessed by
pressing the blank screen for two (2) seconds. This action will
bring the UI out of sleep mode. All other screens will display
a "Home" icon at the lower right corner. Pressing the Home
button will take the UI to the Home screen.
This screen normally will have five (5) buttons. Each button
will access user information.
Displays a set of six (6) buttons that, when
System
pressed, will show the status of that item.
Status
Settings accessed via this button are:
• Inlet
• Prefilter
• RO Membrane
• RO Water Tank
• Postfilter
• History
After replacing filters, the percentages for
Reset
filter life should be reset to 100%.
Filter Life
This is a password-protected button. These
System
settings are critical to the operation of the
Settings
system. Contact Pentair Everpure Technical
Support, at 630.307.3000 for more information
about this setting.
Settings accessed by this button are:
• Date/Time
• Store Settings
• Air Purge/Flush
• Units of Measure
• Reset Filter Life
This is a password-protected button. These
Calibrate
settings are critical to the operation of the
Sensors
system. Contact Pentair Everpure Technical
Support, at 630.307.3000 for more information
about this setting.
Settings accessed by this button are:
• Pressure Sensors
• Pressure 4 Threshold
• Tank Level
• TDS Sensors
• Flow Meters
Pentair Everpure contact information.
Contact
Info
20
WATER YOU CAN TRUST
COMPLETE HE-3 USER
®
Conserv HE-3
®
System Reset System
Status Filter Life Settings
Calibrate Contact
Sensors Info
Clear
Lockout
Date and
Time