Pentair Everpure Conserv HE-3 Original Instructions Manual page 30

Press the Flow Meters button to display the Flow Meter
Calibration screen. Use the "m" and "b" settings that are
shown on the flow meter packaging.
NOTE: System comes calibrated from the factory. Flow
meter calibration is only required when replacing a
flow meter.
To change the settings:
1. Press the window for the "m" value of the flow meter.
2. Use the Up and Down arrows to enter the value listed.
3. Press the window for the "b" value of the flow meter.
4. Use the Up and Down arrows to enter the value listed.
5. When finished, press the Check Mark to save the
changes.
Contact Info
Press the Contact Info button to display Pentair's address and
phone number.
30
WATER YOU CAN TRUST
®
Flow Meter Calibration
FMeter#
m b
0.00 F1 0.00
0.00 F2 0.00
Conserv HE-3
®
Pentair
1040 Muirfield Dr
Hanover Park, IL 60133
(630) 307-3000