Pentair Everpure Conserv HE-3 Original Instructions Manual page 22

High efficiency reverse osmosis system
Table of Contents

Advertisement

The Prefilter Status screen is displayed when the Prefilter
button is pressed.
• Pre-Filter Life is shown as a percentage remaining
based on the volume of water used.
• Pressure Drop represents the pressure difference as
measured before and after the prefilters.
The RO Membrane Status screen is displayed when the RO
Membrane button is pressed. All of the values represent
real-time information.
• RO Water TDS level measured as ppm.
• RO Pump Pressure (P1) of the RO inlet water
measured as psi (MPa).
• Waste TDS level of the water rejected by the RO
cartridge measured as ppm.
• Recovery is the real-time percentage, of the feed water
that becomes blended water.
• Rejection is the real-time percentage, of the minerals
in the water that are sent to waste or drain.
The Water Tank Status screen is displayed when the RO
Water Tank button is pressed.
• Tank Status is an indicator of the water level (filling/
emptying/idle).
• Tank Level is the real-time percentage of the volume
of water in the Storage Tank.
The Post-Filter Status screen is displayed when the Postfilter
button is pressed. All of the values represent real-time
information.
• Outlet Pressure of the filtered water in psi (MPa).
• Pressure Drop represents the real-time pressure
difference as measured before and after the
postfilter(s).
• Blend Flow Rate is a measure of the water flow out of
the system to the application. It is measured in gallons
per minute (gal/min) or Liters per minute (L/min).
• Blend TDS is a real-time measurement in ppm of the
water going to the application.
• Post Filter Life is shown as a percentage remaining
based on the volume of water used.
22
WATER YOU CAN TRUST
®
Prefilter Status
Pre-Filter Life
100 %
Pressure Drop
0 psi
RO Membrane Status
RO Water TDS
0 ppm
RO Pump Pressure
0 psi
Waste TDS
0 ppm
Recovery
80 %
Rejection
90 %
Water Tank Status
Tank Status
Idle
Tank Level
0 %
Post-Filter Status
Outlet Pressure
0 psi
Pressure Drop
0 psi
Blend Flow Rate
1.57 gpm
Blend TDS
200 ppm
Post Filter Life
100 %

Advertisement

Table of Contents
loading

Table of Contents