Pentair Everpure Conserv HE-3 Original Instructions Manual page 23

Press the History button to display the first page of the
system's history. Use the Left/Right arrow buttons to move to
pages 2 and 3.
NOTE: Most of these values cannot be reset in the History
menus, with the exception of filter life percentages.
All of the values are real-time unless listed as Max
or Min.
The maximum and minimum inlet TDS values reflect the
highest and lowest TDS readings over the life of the system.
NOTE: Recovery and Rejection percentages will not total
100%. Recovery is the percentage of water that
becomes RO permeate and is sent to the Storage
Tank. Rejection is the percentage of minerals in
the water that do not pass through the RO filter
membrane.
EVERPURE CONSERV HE-3 RO SYSTEM INSTALLATION AND OPERATION GUIDE
® ®
History Page 1
Pre-Filter Life 100 %
Post-Filter Life 100 %
RO Membrane Life 100 %
Max Recovery 80 %
Min Recovery 90 %
History Page 2
RO Pump Cycles 1234567
RO Pump Hours 12345
Tank Pump Cycles 1234567
Tank Pump Hours 12345
# of Air Purge 0
# of Flushes 0
History Page 3
Inlet Flow Total 1234.5 gals
Max Inlet TDS 1234.5 gals
Min Inlet TDS 809 ppm
Blend Flow Total 1234.5 gals
Max Blend TDS 0 ppm
Min Blend TDS 0 ppm
23