About this book
Safety precautions
Safety precautions
!
DANGER:
Electrical current from power, telephone, and communication cables is hazardous.
To avoid a shock hazard:
Do not connect or disconnect any cables or perform installation, maintenance, or
reconfiguration of this product during an electrical storm.
Connect all power cords to a properly wired and grounded electrical outlet.
Connect to properly wired outlets any equipment that will be attached to this
product.
When possible, use one hand only to connect or disconnect signal cables.
Never turn on any equipment when there is evidence of fire, water, or structural
damage.
Disconnect the attached power cords, telecommunications systems, networks, and
modems before you open the device covers, unless instructed otherwise in the
installation and configuration procedures.
Connect and disconnect cables as described in the following table when installing,
moving, or opening covers on this product or attached devices.
Table 1. Connecting and disconnecting cables
To connect:
1
Turn everything off.
2
Attach all cables to devices.
3
Attach signal cables to connectors.
4
Attach power cords to outlet.
5
Turn device ON.
!
DANGER:
Some laser products contain an embedded Class 3A or Class 3B laser diode. Note the
following:
Laser radiation when open. Do not stare into the beam, do not view directly with
optical instruments, and avoid direct exposure to the beam.
20
Installing the Avaya S8500 Media Server with an Avaya G650 Media Gateway
To disconnect:
1
Turn everything off.
2
Remove power cords from outlet.
3
Remove signal cables from connectors.
4
Remove all cables from devices.
December 2003