Three-Pair And Four-Pair Modularity - Avaya S8500 Manual

Table 25: Station pinout chart
Jack Name 1
DCP
ANALOG
HANDSET

Three-pair and four-pair modularity

Figure 94, 3-pair and 4-pair modularity,
terminal.
Most terminals connect to an information outlet (modular jack) installed at the work location. Make the
connections from the port circuit pack to the modular jacks, as shown in
modularity, on page 245. Then plug the terminal into the modular jack.
Adjunct power connection locations
Figure 94: 3-pair and 4-pair modularity
Figure notes
1 Port Circuit Pack
2 Media Gateway Connector Pins
(3-Pair Modularity)
3 Main Distribution Frame (MDF) Pins
(3-Pair Modularity)
4 Input to Information Outlet (4-Pair
Modularity)
Installing the Avaya S8500 Media Server with an Avaya G650 Media Gateway
December 2003
2 of 2
2 3 4
TIP
TIP
-TX +RX
on page 245 is from the port circuit pack to the voice or data
on page 246 shows three methods of connecting adjunct power.
Installing and wiring telephones and trunks
5 6 7
RING
RING
-RX +TX
Figure 94, 3-pair and 4-pair
5 Adjunct Power
6 Output From Information Outlet (4-
Pair Modularity)
7 Voice or Data Terminal Pins
8
245