Logging Off The Remote Supervisor Adapter - Avaya S8500 Manual

Figure 12: Update firmware
5
Click Browse. Go to the saved location from step 3.
6
Click Open to select the cnetbrus.pkt file and have it appear in the box beside Browse.
7
Click Update to begin the firmware update. A progress window opens as the files are transferred
to temporary storage on the RSA.
A confirmation window opens when the transfer is complete.
8
Verify that the file in the confirmation window is the file that you wish to use for the update. If
you do not wish to continue with the update, click Cancel.
9
To continue with the firmware update, click Continue.
A progress window opens as the firmware on the RSA updates. A confirmation window appears
when the update is completed.
10
Repeat
11
After you receive the confirmation window, click Restart to restart the RSA.
12
Click OK to continue with the restart.
13
Click OK to close the browser window.
14
Log in to the RSA.

Logging off the Remote Supervisor Adapter

1
Select Log Off from the left pane.
2
In the confirmation window, click Yes.
Installing the Avaya S8500 Media Server with an Avaya G650 Media Gateway
December 2003
Step 4 through Step 9 each time to update the cnetmnus.pkt and cnetrgus.pkt files.
NOTE:
You should update all three components (cnetbrus.pkt, cnetmnus.pkt and cnetrgus.pkt)
from the Avaya support website before restarting the RSA.
Configuring the Remote Supervisor Adapter
77