Gps Function - Planet VCG-1500WG-LTE User Manual

Object
Battery backup time
Note: The battery supply voltage must be less than AC power supply voltage.

7.6 GPS Function

GPS function is to configure GPS data center address and port, enabling SNMP function. GPS data will be sent to the SNMP
server. When initiative report is unable, center address terminals can send AT command to the device which captures the
specified GPS data. When initiative report is enabled, the device can send GPS data content to center address during the set
reported interval.
Figure 7-5-1 Battery Power Configuration
Description
The power supply duration after AC is cut off
56
User's Manual of VCG-1500WG-LTE