4.3.1.4. Advanced Routing
Operating Mode: Gateway, BGP, RIP2 Router, OSPF Router and Router
If the Router is hosting users' Internet connection, select Gateway mode. If another Router exists on their network,
select Router mode.
Dynamic Routing
Dynamic Routing enables the Router to automatically adjust to physical changes in the network's layout and exchange
routing tables with other Routers. The Router determines the network packets' route based on the fewest number of
hops between the source and destination.
To enable the Dynamic Routing feature for the WAN side, select WAN. To enable this feature for the LAN and wireless
side, select LAN and WLAN. To enable the feature for both the WAN and LAN, select Both. To disable the Dynamic
Routing feature for all data transmissions, keep the default setting, Disable.
Dynamic Routing is not available in Gateway mode.
46