Maintenance - Kessel Comfort PLUS Original Operation Manual

6. Maintenance

6.1 Update and reading out data
External hard drives must not be connected since the control unit
L
would not work (max. 100 mA power supply). A USB flash drive must
be formatted with FAT via a Windows PC before use and be
given a name.
When a USB flash drive is connected to the control unit, it will be recogni-
sed automatically. Then the data transmission menu will appear with these
selection options:
• |0.1 Read out data|
• |0.2 Software update|
• |0.3 Read in parameters |
If the menu |0 System information| is displayed, the ESC key
can be used to return to the data transmission menu described above.
56
Connect USB flash drive.
Connect the USB flash drive, data transmission
(This is only possible if a respective file (*.hex)
is on the USB flash drive)
Connect the USB flash drive, data transmission
(This is only possible if a respective file (*.csv)
is on the USB flash drive)
Installation and operating manual
Read out data
Select
confirm with OK. A file with the system
data is stored on the USB flash drive
Carry out update
Select
menu appears. enter password and confirm with OK, the
update is carried out automatically, simply
Read in parameters
parameters|,
menu appears.
and confirm with OK, the update is carried
out automatically, simply follow the
|Read out data|
and
(*.csv).
|Software update|,
follow the display dialogue.
|Read in
Select
enter password
display dialogue.
010-700_01