Jts315La - Jet JTS-315LA Operating Instructions Manual

Test Report No.: No.: 17706687 001
Part II of II
Requirement  Test
Clause
appreciable extent and that there is no trace of
water on insulation for which creepage distances
are specified in 27.1.
15 INSULATION RESISTANCE AND ELECTRIC STRENGTH TEST
15.1 Adequate insulation resistance and electric
strength
Test conditions
15.2 Insulation resistance
Limits for insulation resistance
Measurement of insulation resistance .....................: Limit:
15.3 Electric strength
Electric strength test .................................................: The electric strength test is
16 ENDURANCE TEST
16.1 Tools operating in extended normal use
Page 28 of 63
EN 61029-1:2009+A11
Result - Remark
See below
Cold tool, after humidity
treatment.
See below
See below
TS-315D:
Live part - Tool enclosure:
7M.
Live part - Switch button: 7M
Live part - Saw blade: 7M
Inner and outer surface of
switch box: 5M
All measured values exceed
100 M.
See below
carried out at the followed
locations:
TS-315D:
L/N- Tool enclosure: 3750V.
L/N- Switch button: 3750V.
L/N- Saw blade: 3750V.
Inner and outer surface of
switch box: 2500V
Series point to motor
enclosure: (1000+2x282)V
TS-315G:
L1/L2/L3 - Tool enclosure:
3750V
L1/L2/L3 - Switch button:
3750V
L1/L2/L3 - Saw blade: 3750V
Inner and outer surface of
switch box: 2500V
See below
Verdict
P
P
P
P
P
P
P
P
P
P