Jts315La - Jet JTS-315LA Operating Instructions Manual

Test Report No.: No.: 17706687 001
Part II of II
Requirement  Test
Clause
Symbol or nature of supply
Rated frequency or range in hertz
Rated input in W or kW or rated current in amperes See labels
Rated current in A, if greater than 10A
The business name and address of the
manufacturer and, where applicable, his authorised
representative. Any address shall be sufficient to
ensure contact;
Designation of the tool;
Designation of the tool may be achieved by a
combination of letters and/or numbers;
Designation of series or type;
Allowing the technical identification of the product:
this may be achieved by a combination of letters
and/or numbers and may be combined with the
designation of the tool;
The year of manufacture;
Rated operating time, or rated operating time and
rated resting time, in h, min or s, if applicable;
Symbol class II
IP degree if greater than IP20
Any mandatory mark showing compliance with
legislation by reference to this standard
Tools for star-delta connection
Alternate components which can be selected by
control device
Rated input or current to be marked on the tool
shall be total maximum input or current on circuit at
the same time
Additional marking
7.2 Tools for short time operation
Marking of short-time operation or intermittent
operation shall correspond to normal use
Marking with operating/resting time
7.3 Marking for tools with heating elements
7.4 Adjustment of input, voltages
7.5 Tools with more than one rated voltage
7.6 Symbols for markings
Page 9 of 63
EN 61029-1:2009+A11
Result - Remark
~
50Hz
See labels
See labels
See labels
2015
S6 40%
Class I
IP44
Verdict
P
P
P
N/A
P
P
P
P
P
N/A
P
P
N/A
N/A
P
P
N/A
N/A
N/A
N/A
N/A
P
P