Table of Contents
Advertisement
1.6
Impact hazard
1.7
Stabbing or puncture hazard
1.8
Friction or abrasion hazard
1.9
High pressure fluid injection hazard
1.10
Ejection of parts (of machinery and
processed materials/ workpieces)
1.11
Loss of stability (of machinery and
machine parts)
1.12
Slip, trip and fall hazards in
relationship with machinery (because
of their mechanical nature)
2
Electrical hazards, caused for
example by:
2.1
Electrical contact (direct or indirect)
2.2
Electrostatic phenomena
2.3
Thermal radiation or other
phenomena such as ejection of
molten particles, and chemical
effects from short-circuits, overloads;
etc.
2.4
External influences on electrical
equipment
3
Thermal hazards resulting in :
Inherently safe machinery design and construction and take
necessary protection measures:
1.Request saw blade guard is provided to guard that portion of the
sawblade above the table
2.Slot for the sawblade in the table meets requirements of standards
3.The sawblade below the table can't be access
4.All drive mechanisms are guarded
1.Request saw blade guard is provided to guard that portion of the
saw blade above the table
2.Slot for the sawblade in the table meets requirements of standards
3.The sawblade below the table can't be access
Not relevant
Not relevant
Inherently safe machinery design and construction, take
necessary protection measures and inform users of the residual
risks:
1. The top guard is made of 3mm thickness PC and the guard below
the table is made of 2mm thickness Q235 steel.
2. Required flanges are provided (steel and ultimate tensile:350N
2
mm
)
3. Required riving knives (Mn65 and ultimate tensile:580N mm
indicated in the manual
4. Required fence is provided
Inherently safe machinery design and construction:
The machine has adequate stability and passes the stability test in
EN 61029-2-1:2012.
Not relevant
Inherently safe machinery design and construction:
Compliant to EN 61029-1:2009+A11 and EN 61029-2-1:2012.
Not relevant
Not relevant
Inherently safe machinery design and construction:
Compliant to EN 61029-1:2009+A11 and EN 61029-2-1:2012.
by a fixed guard
2
) and
Advertisement
Chapters
Table of Contents
