Jts315La - Jet JTS-315LA Operating Instructions Manual

Circular saw bench
Hide thumbs Also See for JTS-315LA:
Table of Contents

Advertisement

Page 3 of 63
Test Report No.: No.: 17706687 001
Part II of II
EN 61029-1:2009+A11
Requirement  Test
Clause
Result - Remark
Verdict
Test item particulars:
Equipment mobility ........................................................ : Transportable
Operating condition ....................................................... : S6 40%
Tested for IT power systems ........................................ : N/A
IT testing, phase-phase voltage (V) .............................. : N/A
Class of equipment ....................................................... : Class I
Mass of equipment (kg) ................................................ : 44kg for TS-315A, TS-315AE and TS-315E, 48kg for
other models
Protection against ingress of water .............................. : IP44
Possible test case verdicts:
- test case does not apply to the test object ................. : N/A
- test object does meet the requirement ....................... : P(ass)
- test object does not meet the requirement ................. : F(ail)
General remarks:
"(see remark #)" refers to a remark appended to the report.
"(see appended table)" refers to a table appended to the report.
Throughout this report a point is used as the decimal separator.
The test results presented in this report relate only to the object tested.
This report shall not be reproduced except in full without the written approval of the testing laboratory.
Brief description of the test sample:
The machines are table saws equipped with a 315mm diameter saw blade driven by an induction motor for
cutting wood and similar materials.

Advertisement

Table of Contents
loading

Table of Contents