Table of Contents
Advertisement
Test Report No.: No.: 17706687 001
Part II of II
Requirement Test
Clause
Name and address of the manufacturer
anu a turer s model or t e re eren e
Repeat of safety markings
Mass of the tool
Requirements for handbook
a) Installation instruction
1-Unpacking and assembly.
2-Setting-up or fixing tool in a stable position.
3-Connection to power supply, cabling, fusing,
socket-type and earthing requirements.
4-Illustrated description of functions.
5-Limitations on ambient conditions.
6-List of contents.
7-Information about disassembly and reassembly if
applicable for transportation and/or use.
b) Operating instruction
1-Setting and testing.
2-Tool changing.
3-Clamping of work
4-Limits on size of work piece.
5-General instructions for use.
6- ndi ation o the orre t o erator s osition
7-Instruction on how to handle jammed
accessories
8-Information about lifting handles/similar, and
instruction to use them for transportation.
c) Safety precaution
1-Precautions and use of PPE.
2-Special safety precautions.
3-Dust extraction.
4-Guards, security and adjustment.
5-General safety instructions.
These shall consist of the following text:
"
precautions should always be followed to reduce
the risk of fire, electric shock and personal injury
Page 11 of 63
EN 61029-1:2009+A11
hen using ele tri tools basi sa et
Result - Remark
OK
OK
OK
OK
OK
Checked ok
Checked ok
Checked ok
Verdict
P
P
P
P
P
P
P
P
Advertisement
Chapters
Table of Contents
