Table of Contents
Advertisement
Test Report No.: No.: 17706687 001
Part II of II
Requirement Test
Clause
including the following.
Read all these instructions before attempting to
operate this product and save these
instru tions
d) Maintenance and servicing
- Regular cleaning, maintenance and lubrication
( hi h shall in lude the arning
before carrying out any adjustment, servicing or
maintenan e ).
- Servicing by manufacturer or agent; list of
addresses
- list of user replaceable parts, if any
- Special tools which may be required
- Instruction, how to safely remove blockages of
dust, chips or workpiece fragments.
e) Safe operation
The following information shall also be given:
-
The name and address of the manufacturer;
he manu a ture s model or t e re eren e;
-
A repeat of the safety markings (e.g. maximum
-
speed, capacity, etc.) that are to be marked on
the tool;
An explanation of any symbols or pictograms
-
marked on the tool;
The mass of the tool including detachable parts.
f)
Connection to water supply
1) For tools intended to be connected to a water
supply, instructions for the connection to the
water supply, the use of the water and the use of
attachments to comply with 14.5 in order to
avoid affection of the tool by water, the inspection
of hoses and other critical parts which could
deteriorate and the maximum permitted pressure
of the water supply.
2) For tools intended to be connected to a water
supply, the substance of the following
instructions, if applicable:
for tools provided with a PRCD: Never use
-
the tool without the PRCD delivered with the
tool,
-
for tools provided with an isolating
transformer: Never use the tool without the
transformer delivered with the tool or of the
Page 12 of 63
EN 61029-1:2009+A11
Result - Remark
Checked ok
emo e the lug
Checked ok
Verdict
P
P
N/A
N/A
Advertisement
Chapters
Table of Contents
