Jts315La - Jet JTS-315LA Operating Instructions Manual

Test Report No.: No.: 17706687 001
Part II of II
Requirement  Test
Clause
Nature of supply besides voltage
Dimension of class II symbol
Placement of class II symbol
7.7 Marking of terminals
Neutral conductor
Earthing terminal
Marking on removable parts
7.8 Markings for regulating devices and switches
"O osition and osition ith greater o
speed etc.
ush buttons "O
ush button "O
Switches without locking means
Manual reset buttons for thermal cut-outs
7.9 Durability and legibility
Location of the markings
Durability of markings
7.10 Regulating devices adjusted during operation
7.11 Marking of switches for different parts of the tools
7.12 More than one supply
7.13 Requirements for handbook
he ords Original instru tions shall a pear on
the language version(s) verified by the
manufacturers or his authorised representative.
he translations shall bear the ords
o the original instru tions and the shall be
a om anied b a o
instru tions .
a) Installation instruction
b) Operating instruction
c) Safety precaution
d) Maintenance and servicing
e) Safe operation
Page 10 of 63
EN 61029-1:2009+A11
osition
osition
ranslation
o the Original
Result - Remark
~
Class I
No conductors exclusively used
for neutral conductor.
Found satisfactory
Not on removable parts
Not applicable
i
Not applicable
Figure "O marked and the
button colour is red.
Figure "I marked and the
button colour is green.
Checked and found
satisfactory
Stuck on the machine frame
Found satisfactory
Not applicable
Only one switch provided
See below
OK
OK
OK
OK
OK
OK
Verdict
P
N/A
N/A
P
N/A
P
P
N/A
N/A
P
P
N/A
P
P
P
P
N/A
P
N/A
P
P
P
P
P
P
P