Test Set-Up And Operation Modes; Principle Of Configuration Selection; Physical Configuration For Testing; Test Operation And Test Software - Jet JTS-315LA Operating Instructions Manual

Circular saw bench
Hide thumbs Also See for JTS-315LA:
Table of Contents

Advertisement

Produkte
Products
Prüfbericht - Nr.:
Test Report No.

3 Test Set-up and Operation Modes

3.1 Principle of Configuration Selection

Emission:
The equipment under test (EUT) was configured to measure its highest possible
emission level. The test conditions were adapted accordingly in reference to the instructions
for use.
Refer to the related paragraph of this report.
Immunity:
Refer to the related paragraph of this report.

3.2 Physical Configuration for Testing

Refer to the related paragraph of this report.

3.3 Test Operation and Test Software

Refer to the related paragraph of this report. No software was used.

3.4 Special Accessories and Auxiliary Equipment

None.

3.5 Countermeasures to achieve EMC Compliance

No special measure is employed to achieve the requirement.
17706754 001
Seite 6 von 18
Page 6 of 18

Advertisement

Table of Contents
loading

Table of Contents