Jts315La - Jet JTS-315LA Operating Instructions Manual

1.2 Shearing hazard
1.3 Cutting or severing hazard
1.4 Entanglement hazard
Drawing –in or trapping hazard
1.5
Inherently safe machinery design and construction and
take necessary protection measures:
1. Request saw blade guard is provided to guard that
portion of the sawblade above the table
2. Slot for the sawblade in the table meets requirements
of standards
3. The sawblade below the table can't be access
4. All drive mechanisms are guarded by a fixed guard
5. No power operated clamping device provided
Inherently safe machinery design and construction and take
necessary protection measures:
1. The top guard is made of 3mm thickness PC and the guard below
the table is also made of 2mm thickness Q235 steel.
2.Required flanges are provided (steel and ultimate tensile: 350N
2
mm )
3.Request saw blade guard is provided to guard that portion of the
sawblade above the table
4. Slot for the saw blade in the table meets requirements of EN
61029-2-1:2012.
5.The sawblade below the table can't be access
6.All drive mechanisms are guarded by a fixed guard
7. Push stick provided.
Inherently safe machinery design and construction and take
necessary protection measures:
1.Required flanges is provided (steel and ultimate tensile:350N mm
2.Required fence is provided
3.Request saw blade guard
is provided to guard that portion of the sawblade above the table
4.Slot for the sawblade in the table meets requirements of standards
5.The sawblade below the table can't be access
6.All drive mechanisms are guarded
Inherently safe machinery design and construction and take
necessary protection measures:
1.Request saw blade guard is provided to guard that portion of the
sawblade above the table
2. Slot for the sawblade in the table meets requirements of standards
EN61029-2-1:2012.
3.The sawblade below the table can't be access
4.All drive mechanisms are guarded
by a fixed guard
by a fixed guard
2
)