Configuration Steps For A Rockwell Control Without Eds Support; Integrating The Hardware Into The Plc Using The Generic Ethernet Module - Leuze electronic MA 258i Operating Instructions Manual

12.3

Configuration steps for a Rockwell control without EDS support

12.3.1 Integrating the hardware into the PLC using the generic EtherNet module

In the RSLogix 5000 configuration tool for EtherNet/IP, software version <20.00, a so-called
"generic EtherNet module" is created for the MA
Figure 12.4: Generic module
Leuze electronic
Commissioning and configuration
258i under the Communication path.
MA 258i 71