Description Of Functions - Leuze electronic MA 258i Operating Instructions Manual

General information
1.3

Description of functions

The MA 258i
fieldbus.
Bar code reader:
2D-code reader:
Hand-held scanner
RFID read-write devices:
Bar code positioning system:
Optical distance sensors:
Measuring light curtain:
multiNet master connection box:
Additional RS 232 devices:
This is accomplished by transmitting the data from the DEV via an RS 232 (V.24) interface
to the MA 258i
the RS 232 interface corresponds to the Leuze standard data format (9600bd, 8N1 and STX,
data, CR, LF).
The integration of the EDS file in the hardware manager of the PLC is necessary to ensure
the correct function of the MA 258i.
The corresponding Leuze devices are selected using a rotary code switch on the circuit
board of the connector unit. Many additional RS 232 devices can be connected through a
universal position.
6
modular interfacing unit is used to connect Leuze devices directly to the
where a module converts it into the EtherNet/IP format. The data format on
BCL 8, 22, 300i, 500i, 600i, 90, 900i
LSIS 122, LSIS 222, LSIS 4x2i, DCR 200i
ITxxxx, HFU/HFM
RFM 12, 32, 62 & RFI 32, RFU 100, RFU 200
BPS 8, BPS 300
ODSL 9, ODSL 30, ODSL 96B
KONTURflex to Quattro-RSX/M12
MA 3x
Scales, third-party devices
MA 258i Leuze electronic