Hand-Held Scanner (S4 Switch Position 8) - Leuze electronic MA 258i Operating Instructions Manual

16.8

Hand-held scanner (S4 switch position 8)

Specifications for the serial interface
Default parameter
Baud rate
Data mode
Handshake
Protocol
Frame
Notice!
Command mode cannot be used with hand-held scanners.
Recommended settings
• Produced/Consumed data settings:
dependent on the number of digits of the bar code that is to be read.
With an 12-digit bar code (+ 2 bytes of status bytes), for example, it is advisable to
use the "20 bytes In/4 bytes Out" combination.
Leuze electronic
Specifications for Leuze end devices
Hand-held scanner
9600
8N1
no
framing protocol without acknowledgment
<Data> <CR> <LF>
MA 258i 105