Table of Contents
Advertisement
Notice!
The designation and function of the SWIO depends on the connected device. Please observe
the following table!
Device
BCL 22
BCL 8
Hand-held scanner/BCL 90
RFM/RFU/RFI
LSIS 122, LSIS 222, DCR 202i
LSIS 4x2/BCL 300, BCL 500,
BCL 600i
KONTURflex
ODSL 9, ODSL 96B
ODSL 30
Table 7.1:
Supply voltage
Attention!
For UL applications, use is only permitted in class 2 circuits in accordance with the NEC
(National Electric Code).
The fieldbus gateways are designed in accordance with safety class III for supply by PELV
(protective extra-low voltage with reliable disconnection).
Connecting functional earth FE
Notice!
Ensure that the functional earth (FE) is connected correctly. Unimpaired operation is only
guaranteed when the functional earth is connected properly. All electrical disturbances (EMC
couplings) are discharged via the functional earth connection.
Switching input/output
The MA
258i
located on the PWR IN M12 connector and on the PWR OUT M12 connector. The connec-
tion of the switching inputs/outputs from PWR IN to PWR OUT can be interrupted by means
of a jumper. In this case, only the switching input and output on PWR IN are active.
The function of the switching inputs and outputs is dependent on the connected Leuze
device. Detailed information on this topic can be found in the respective operating instruc-
tions.
Leuze electronic
PIN 2
SWOUT_1
SW_0
n.c.
SWOUT_1
SWOUT
configurable
IO 1 / SWIO 3
IO 2 / SWIO 4
n.c.
Q1
Q1
Device-specific function of the SWIOs
is equipped with the SWIO_1 and SWIO_2 switching inputs/outputs. This is
MA
258i
Electrical connection
PIN 4
SWIN_1
SW_I
n.c.
SWIN_1
SWIN
configurable
n.c.
n.c.
active/reference
(on SWIN_1, PWRIN)
37
Advertisement
Table of Contents
