Table of Contents
Advertisement
Selected scanner
Gateway mode
Ring buffer fill level
Received ASCII Frames
ASCII Framing Error (GW)
Number of Received CTB's
Number of Received SFB's
Command-Buffer fill level
Number of received transparent frames
Number of send fieldbus frames
Number of invalid commands
Number of ASCII stack send errors
Number of good ASCII send frames
Table 9.3:
ND
W-Ack
R-Ack
Data loss
Ring buffer overflow
Ring buffer overflow (internal)
Ring buffer CTB/SFB (internal)
DEX
BLR
Table 9.4:
ASCII-Start-Byte
ASCII-End-Byte1
ASCII-End-Byte2
ASCII framing
ASCII baud rate
ASCII warm start status
Table 9.5:
EIS input data length
EIS output data length
IP address
Leuze electronic
Currently selected Leuze device (selected via switch S4).
Transparent or Collective mode.
Current fill level of the ring memory in Collective mode (ASCII->Fieldbus).
1024 bytes max.
Number of received ASCII frames.
Number of received framing errors.
Number of CTB commands.
Number of SFB commands.
Current fill level of the ring memory in Command mode (fieldbus->ASCII).
1024 bytes max.
Number of received fieldbus frames without CTB/SFB.
Number of frames sent via the fieldbus.
Number of invalid commands.
Number of frames that the ASCII memory could not send.
Number of frames that the ASCII memory sent successfully.
General gateway information
Current status of ND bit.
Current status of W-Ack bit.
Current status R-Ack bit.
Current status of data loss bit.
Current status of ring buffer overflow bit.
Current status of ring buffer overflow bit (internal status).
Current status of CTB and SFB bits.
Current status of DEX bit.
Current status of BLR bit.
Current states of the status and control bits
Currently configured start byte
(dependent on switch position S4).
Currently configured stop byte 1
(dependent on switch position S4).
Currently configured stop byte 2
(dependent on switch position S4).
Character length, parity, stop bit(s).
Currently configured baud rate
(dependent on switch position S4).
Indicates whether the ASCII memory has detected and accepted a valid
configuration.
ASCII configuration
Length of the data received (consumed data, default 4 bytes).
Length of the data supplied (produced data, default 18 bytes).
Displays the set IP address.
MA
258i
Configuration
51
Advertisement
Table of Contents
