Manually Setting The Ip Address - Leuze electronic MA 258i Operating Instructions Manual

3.5.1

Manually setting the IP address

To set the IP address manually, the DHCP operation via BootP or the Rockwell control must
be deactivated.
Figure 3.2: Manually setting the IP address
If your system does not include a DHCP server or if the IP addresses of the devices are to
be set permanently, proceed as follows:
 Have the network administrator specify the data for IP address, net mask and gateway
address of the MA 258i.
Leuze electronic
Fast commissioning / operating principle
MA 258i 13