Reset (Function 74); Save Data, Load (Function 75) - Siemens FIDAMAT 6-G Operating Instructions Manual

Operation
5.11 Configuration
5.11.7

Reset (function 74)

Figure 5-52
With this function, you can restart.
After calling this function, the device switches to the "Warm-up phase" operating state, which
activates the functional check at the same time. Only after successfully running through this
phase the device is completely ready for operation again.
See also
Warm-up phase and operating states (Page 4-5)
5.11.8

Save data, load (function 75)

Figure 5-53
With this function, configure the user data memory:
Press the softkey 1
commissioned. All individual settings are then saved.
Press the softkey 2
These functions are important when the device is undergoing repairs or maintenance work,
or, for example, new parameterization should be tried out.
Press softkey 3 to re-establish the factory settings.
5-50
Carrying out a reset
User data memory
"Save user data"
"Load user data"
e.g. after the system has been successfully
, to load the last saved user data.
Operating instructions, 07/2006, A5E00478463
FIDAMAT 6-G