Table of Contents
Advertisement
7. Calibration with test gas 4, after 10 minutes of flushing
8. Flushing with sample gas: 8 minutes
9. Short-term signal contact in order to be able to start Autocal on another device or
The specified Autocal sequence is shown in the following function screens.
Figure 5-16
Figure 5-17
FIDAMAT 6-G
Operating instructions, 07/2006, A5E00478463
channel.
Note
The FIDAMAT 6-G has a test gas connection and a zero gas connection. These can be
controlled via the relay outputs of the device. Further test gases can be included via
external valves.
Example Autocal sequence
Example Autocal sequence
Operation
5.8 Calibration
5-19
Advertisement
Table of Contents
