Delivery Information; Standards And Regulations - Siemens FIDAMAT 6-G Operating Instructions Manual

1.4

Delivery information

The respective scope of delivery is listed on the shipping documents– enclosed with the
delivery– in accordance with the valid sales contract.
When opening the packaging, please observe the corresponding information on the
packaging material. Check the delivery for completeness and perfect condition. In particular,
you should compare the order number on the type plates with the ordering data, if available.
If possible, please retain the packaging material, since you can use it again in case of return
deliveries.
See also
Return address / form (Page 9-11)
1.5

Standards and regulations

As far as possible, the harmonized European standards were the basis for the specification
and production of this device. As far as no harmonized European standards have been
applied, the standards and regulations for the Federal Republic of Germany are valid.
When this product is used beyond the scope of these standards and regulations, the valid
standards and regulations of the country of the operating company apply.
See also
Technical data of the FIDAMAT 6 series (Page 7-1)
Technical data of the FIDAMAT 6-G (Page 7-3)
FIDAMAT 6-G
Operating instructions, 07/2006, A5E00478463
General Information
1.4 Delivery information
1-3