Reset (Function 74); Save / Load Data (Function 75) - Siemens FIDAMAT 6 Operating Instructions Manual

Functions
8.6 Configuration
8.6.6

Reset (function 74)

Figure 8-48
With this function, you can carry out a warm restart.
After calling this function, the device switches to the "Warm-up phase", which activates the
functional check at the same time. The device is only completely ready for operation again
after successfully running through this phase.
8.6.7

Save / load data (function 75)

Figure 8-49
You configure the user data memory with this function.
Press the softkey 1
commissioned. All individual settings are then saved.
Press the softkey 2
These functions are important when the device is undergoing repairs or maintenance work,
or, for example, if new parameter settings are to be tried out.
Press softkey 3 to restore the factory settings.
116
Carrying out a reset
User data memory
"Save user data"
"Load user data"
e.g. after the system has been successfully
, to load the last user data saved.
Operating Instructions, 01/2019, A5E00222135-04
FIDAMAT 6