Linear Temperature Compensation (Function 86); Error On/Off (Function 87) - Siemens FIDAMAT 6-G Operating Instructions Manual

Operation
5.11 Configuration
5.11.17

Linear temperature compensation (function 86)

86 Lin.temp.comp.
Figure 5-66
The FIDAMAT 6 is temperature compensated both in the zero point as well as for the span.
If an additional temperature error occurs during operation, compensate it with this function.
"Recompensation at the zero point":
Assuming an average physics temperature, define two different correction values for ranges
of increased temperature and of decreased temperature.
"Recompensation at the measured value (span)":
The procedure is the same as for the zero, but the change refers to the measured value.
Note
If the zero point deviates negatively when the temperature changes, it carried a positive sign,
and vice-versa. The same applies to the measured value.
5.11.18

Error on/off (function 87)

87 Error On/Off
S1
Paramter memory
S2
S3
Flame does not ignit
S4
External fault
Figure 5-67
5-60
aftercompensation of
the zeropoint
aftercompensation of
the span
Compensating temperature
...continue
Switching errors on and off
THC
THC
Operating instructions, 07/2006, A5E00478463
FIDAMAT 6-G