Table of Contents
Advertisement
Operating
7.3 Starting a verification and generating a certificate or report
1. Start the SITRANS mobile IQ app.
The smartphone or tablet automatically searches for Bluetooth devices in the vicinity. The
devices found are listed. Select the Verificator in the device list.
2. Enter the default delivery password "Sitrans AW050!". The delivery password must be
changed for first connection setup.
3. Assign a new password. Everybody authorized to connect additional mobile devices has to
know the new password.
– To avoid potential security threads: Before assigning a password, ensure that no 2 field
– Assign a new password that is not the same as the default password. The new password
– Only use passwords with a high password strength. Avoid weak passwords for example
– Do not use the same password for different Bluetooth field devices.
– If the mobile end device has device protection enabled, SITRANS mobile IQ automatically
7.2
Reset Password
Procedure
1. Select "Bluetooth password reset".
2. Once you have selected "Bluetooth password reset", turn off the Verificator test unit within
60 seconds.
3. Wait for 30 seconds.
4. Turn the Verificator test unit back on.
The password is reset to the default password.
7.3
Starting a verification and generating a certificate or report
Before you start
• Download, install SITRANS mobile IQ and connect to the Verificator: Connecting the
Verificator with SITRANS mobile IQ App (Page 31)
• Make sure you have an active license: Activating a new license (Page 39)
32
devices with the same serial number are displayed in the selection list.
must consist of at least 12 characters (of any type).
"password1", "123456789" or similar.
saves the password. Individually stored device passwords can be deleted in the app.
Operating Instructions, 03/2024, A5E51481698-AA
SITRANS Verificator
Advertisement
Table of Contents
