Cisco BE6000 Design Manual page 54

Pre-deployment Checklist and Tasks
Contents
Procedure 11 Configure search rules on Expressway-E
Step 1. Navigate to Configuration > Dial Plan > Search Rules, and click New.
Step 2. Enter the following into the relevant fields, leaving other fields at their default values:
Rule Name— Outbound

DescriptionOutbound B2B calls

Priority—101

Mode—Alias Pattern Match

Pattern type—Regex

Pattern String—(?!.*@mmcvd.ciscolabs.com$).*

Pattern Behavior—Leave

On Successful

Target—DNS Zone (B2B)

State—Enabled

Step 3. Click Create Search Rule.
Step 4. Click New.
Step 5. Enter the following into the relevant fields, leaving other fields at their default values:
Rule Name— Inbound

Description—Inbound

Priority—100

Mode—Alias Pattern Match

Pattern type—Regex

Pattern String—(.*)(@mmcvd.ciscolabs.com).*

Pattern Behavior—Replace

Replace

On Successful

Target—TraversalServer (B2B)

State—Enabled

Step 6. Click Create Search Rule.
B2B_
Match—Stop
B2B_
B2B calls to mmcvd.ciscolabs.com
String—\1\2
Match—Stop
Deploy MRA and B2B Collaboration
Deployment Details
Deploy CUBE
PAGE 54