Download  Print this page

Cisco BE6000 Design Manual page 32

Collaboration edge
Hide thumbs

Advertisement

Pre-deployment Checklist and Tasks
Contents
Step 3.
Click Add Address.
Next, you configure the IM&P server for remote access.
Step 4.
Navigate to Configuration > Unified Communications > IM and Presence servers, and
then click New.
Step 5.
Enter the following values in the relevant fields:
IM and Presence publisher
Username—CUCMAdmin
Password—[Password]
TLS verify
Step 6.
Click Add Address.
Tech Tip
1
The TLS verify mode can be turned on if we provide in the address field FQDN names of CUCM and
CUCM IM&P respectively. In addition, the tomcat certificates of the both servers needs to be trusted by
the Expressway-C
address—10.106.170.194
mode—Off
1
Deploy MRA and B2B Collaboration
Deployment Details
Deploy CUBE
PAGE 32

Advertisement

loading

  Also See for Cisco BE6000