Core Tasks - Cisco BE6000 Design Manual

Pre-deployment Checklist and Tasks
Contents

Core Tasks

Install Cisco Expressway
Repeat procedures 1 to 5 for Expressway-C and Expressway-E.
Deploy OVA to host
1.
Configure the VM guest
2.
Obtain Licenses
3.
Apply licenses
4.
Configure system name, DNS and NTP settings
5.
Procedure 1 Deploy OVA to host
This procedure represents a typical installation. The Deploy OVF Template dynamically changes to reflect
host configuration.
Step 1. Log into vSphere to access the ESXi host.
Step 2. Select File > Deploy OVF Template.
Deploy MRA and B2B Collaboration
Deployment Details
Deploy CUBE
PAGE 19