Advertisement
Pre-deployment Checklist and Tasks
Contents
Procedure 3
Creating SIP trunk between CUCM and HQ CUBE
Step 1.
After logging into the web administration of the CUCM navigate to the Device->Trunk
Menu and then click Add New
Step 2.
On the trunk configuration page enter the following details
Trunk
Type—SIP Trunk
Device
protocol—SIP
Trunk Service
Step 3.
On the next page, in the Device information section, enter the following details
Device
Name—SIP_HQ1_GWY
Description—SIP trunk to CUBE
Devicepool—DP_HQ1
Call
Classification—OnNet
Location—Hub_None
Step 4.
Next, in the SIP information section, enter the following values and then click Save
Destination Address
Destination
Sip Trunk Security
SIP
Profile—Standard SIP profile
type—Default
1—10.106.170.5
port—5060
Profile—Non - secure SIP Trunk Profile
Deploy MRA and B2B Collaboration
Deployment Details
Deploy CUBE
PAGE 59
Advertisement
