Download  Print this page

Cisco BE6000 Design Manual page 39

Collaboration edge
Hide thumbs

Advertisement

Pre-deployment Checklist and Tasks
Contents
Name—admin
Password—[password ]
Step 3.
Click Create credential.
Procedure 8
Configure traversal server zone on Expressway-E
Step 1.
Navigate to Configuration > Zones > Zones and click New.
Step 2.
Enter the following into the relevant fields, leaving the other fields at their default values:
Under Configuration section
Name—TraversalServer (MRA)
◦ Type—Unified Communication Traversal
Under Connection credentials
Username—admin
Under SIP section
Port—7001
◦ Accept Proxied
◦ TLS verify subject
◦ ICE
support—Off
◦ Poison
Registrations—Allow
name—EXPc1.mmcvd.ciscolabs.com
mode—Off
Deploy MRA and B2B Collaboration
Deployment Details
Deploy CUBE
PAGE 39

Advertisement

loading

  Also See for Cisco BE6000