Cisco BE6000 Design Manual page 29

Pre-deployment Checklist and Tasks
Contents
Procedure 2 Configure device pool in CUCM for video and add the video region
Step 1. Navigate to System > Device Pool and click Add New.
Step 2. Enter the following into the relevant fields, leaving the other fields at their default values:
Device Pool

Date/Time

Region—Video_Reg

Step 3. Click Save.
Procedure 3 Select the above device pool for all video endpoints
Step 1. Navigate to Device > Phone, click Find, and select the video endpoint.
Step 2. In Device Pool, select Video_DP
Step 3. Click Save.
Step 4. Click Apply Config.
Name—Video_DP
Group—CMLocal
Deploy MRA and B2B Collaboration
Deployment Details
Deploy CUBE
PAGE 29