Cisco BE6000 Design Manual page 61

Pre-deployment Checklist and Tasks
Contents
Reader Tip
The dial plan configuration shown here aligns with the UC CVD. CUCC was used to configure dial plans
on the CUCM which by default configures North American Numbering Plan (NANP). However, you can
modify your dial plans to meet your specific needs.
i
Tech Tip
There can be SIP trunking to more than one service provider either for load balancing or as alternate
routing option. For SRST configuration please refer the Unified Communications using the BE6K
tehcnology design guide:
http://www.cisco.com/c/en/us/solutions/enterprise/validated-designs-collaboration/index.html
i
Tech Tip
The branch might also consider to have a back up E1/T1 PSTN in case of WAN failure or access to
emergency services.
Deploy MRA and B2B Collaboration
Deployment Details
Deploy CUBE
PAGE 61