Download  Print this page

Cisco BE6000 Design Manual page 37

Collaboration edge
Hide thumbs

Advertisement

Pre-deployment Checklist and Tasks
Contents
Step 4.
Next, navigate to Maintenance > Security Certificates > Server certificate. Click on the
choose file and select the server certificate signed by the public CA to be uploaded. Then
click on the Upload New certificate.
Procedure 6
Configure Unified Communications traversal zone on Expressway-C
Step 1.
Navigate to Configuration > Zones > Zones and click New.
Step 2.
Enter the following into the relevant fields, leaving the other fields at their default values:
Under Configuration:
Name—TraversalClient (MRA)
◦ Type—Unified Communications traversal
Under Connection credentials:
Username—admin
Password—[password]
Under SIP:
Port—7001
◦ Accept proxied
◦ Mobile and remote
◦ ICE
support—Off
◦ Poison
Under Location:
◦ Peer 1
Tech Tip
The FQDN in the peer address should resolve to the Expressway-E NAT public IP address to engage
NAT reflection. Hence the DNS used by Expressway-C should resolve the Expressway-E hostname to
Expressaway-E NAT IP address
registrations—Allow
access—Yes
mode—Off
address—EXPe1.mmcvd.ciscolabs.com
Deploy MRA and B2B Collaboration
Deployment Details
Deploy CUBE
PAGE 37

Advertisement

loading

  Also See for Cisco BE6000