Cisco BE6000 Design Manual page 55

Pre-deployment Checklist and Tasks
Contents
Procedure 12 Configure transform on Expressway-E
Step 1. Navigate to Configuration > Dial Plan > Transforms and click New.
Step 2. Enter the following into the relevant fields:
Priority—1

Description—Striping out port info from URI

Pattern type—Regex

Pattern string—([^@]*@[^@]*)\:\d\d\d\d.*

Pattern behavior—Replace

Replace

State—Enabled

Step 3. Click Create Transform.
string—\1
Deploy MRA and B2B Collaboration
Deployment Details
Deploy CUBE
PAGE 55